高端电压小感应电流实验室检测检测仪（耐电弧放电实验室检测检测仪）-（确定机管理）

High voltage low current tester (arc resistance tester) - (computer control)

新产商品名称大全称：耐电弧试验机

Product name: electric arc resistance tester

护肤品尺寸：NDH-A

Product model: NDH - A

要求标准单位：GB/T 1411-2002《气体隔热原料耐高压得很低的电流值电弧焊接充放电的试验检测》（等一起IEC  61621-1997）及ASTM D495等规定的要设置制造出的，并适合IEC 149、UL 746A等冲击试验措施

Meet the standards: GB/T 1411-1411 "solid insulating material resistant to high voltage low current arc discharge test" (equivalent to IEC 61621-1997) and the requirements of standards such as ASTM D495 design and manufacturing, and conform to the IEC 149, UL 746 a test method, etc

一 概述

一An overview of the

核心实用领域及性能：

本应力检验机是明确应使用三相异步电机、设备和小型设备等服务行业的电焊工用塑胶、硅胶粘合剂胶胶和电隔热漆等电隔热村料的耐电弧焊接焊接功能评审，主使用物质电隔热村料如：塑胶、复合膜、硅胶粘合剂胶、白云母、瓷质、窗玻璃、电隔热油、电隔热漆、厚纸板等材质的耐电弧焊接焊接功能检验；

本疲劳测试仪由来微机把控好加载，会出现眼下实践操作模式及实践操作的时间，实践操作开始后并导出眼下实践操作数据统计，并可网页打印.标准实验室评估报告。

Main scope of application and features:

This machine is in accordance with the applied in motor, electrical appliances and household appliances and other industries with varnish insulation materials such as plastic, resin adhesive and the arc resistance evaluation, the main used for solid insulating material such as plastic, film, resin, mica, ceramic, glass, insulating oil, insulating paint, such as cardboard medium arc resistance test;

This testing machine controlled by computer operation, can display the current experimental condition and experimental time, after the experiment, and save the current experimental data and can be printed. Standard experiment report 

二 功能特点

1 机器为上成一体节构，下端为操作的模式，上端为检验箱。

2 本商品所采用*新智力调控系统，经由选泽编译程序（IEC或ASTM）可自动化实行试验检测，并在PC上显示信息测试操作过程和最终。

3 **的性能顺畅，抗干预专业能力强，软件测试要求高。

二：Functional features：

1 this machine is up and down a body structure, lower for the operating system, the upper part of test cases.

2 this product USES the latest intelligent control technology, through the selection process (IEC) or ASTM test can be automatically, and displayed on the computer and the test process and results.

3 good safety performance, strong anti-interference ability, high test precision. 

三 主要技术参数

1 电孤通断周期不确定度：值为 ±10ms

2 调压器存储量：2kVA

3 额定功率耐压试验电压降：12.5kV

4 校正直流电压导致精度：±3%

5 瞬时电流调整导致精度：±10%  功率測量精确度：1.5%

6 电级对试件工作压力：（0.5±0.05）N

7 电极片相关材料：钨棒

8 探针多远：（6.35±0.1）mm（IEC）

               （6.0±0.1）mm（ASTM）

9 选择生态环境热度：（23±2）℃

10 便用生态干湿度：（50±5）%

11 外接电源：220V±5%  50Hz  10A

12 实验设计    具体方法：   行业标准/美标/10 mA 间隔/20 mA 不间断/30 mA多次/40 mA维持

13 实验设计软件以下几点：

Three main technical parameters：

Error: 1 arc on-off time less than plus or minus 10 ms

Transformer capacity: 2 kva

3 test voltage rating: 12.5 kV

4: test voltage accuracy + / - 3%

5 current control accuracy: plus or minus 10% current measuring accuracy: 1.5%

6 electrode pressure on sample: (0.5 + 0.5) N

7 electrode materials: tungsten rods

8 electrode distance: 6.35 + / - 0.1 mm (6.0 + 0.1) mm (IEC) (ASTM)

9 using the environment temperature (23 + 2) ℃

10 use environment humidity: (50 + 5) %

Power supply: 220 v + 5% for 50 hz 10 a

Test method: beautiful mark / 10 gb / 30 mA mA continuous / 20 mA continuous/continuous / 40 mA continuous

13 test procedure is as follows:

Procedures section of the arc current

MA arc on-off time s the program s test total duration time s

IEC 61621 ASTM D495

1 1/8 10 s on 7/8 s broken 1/4 7/4 break 60 s 60 s

2 10 1/4 "s pass 3/4 s 1/4 3/4 break 60 s 120 s

3 to 10 1/4 "s make a quarter s break a quarter of a quarter break 60 s 180 s

4 consecutive 10 to 60, 240

5 20 consecutive 60, 300

30 consecutive 6 to 60, 360

7 consecutive 40 to 60, 420 

四  配置

Four configuration：

Serial number name number note

01 arc resistance tester

02 a electrode system

03 electrode bearing a set

04 a set of power cable

05 ground put a rod

06 milliammeter current one

7 a set of computer measurement and control software

08 specimen holder a

09 electrode distance standard 2 blocks

Standard 2 blocks of 10 Angle

11 ceramic pieces 2 pieces

12 one brand inkjet printer

13 1 computer brand

14 1 instruction manual

15 1 certificate

五 物品尺寸：

NDH-A    耐电弧焊接现场实验仪-微机把控好

NDH-B    耐脉冲做实验的时候仪-接触屏管理

Five product model:

NDH - A arc resistance tester - microcomputer control

NDH - B arc resistance tester - touch screen control
ASTMD495耐高压低电流电弧放电试验机详情可以随时来电咨询！