高相电压小电流量冲击试验台仪（耐电孤冲击试验台仪）-（折算机调控）

High voltage low current tester (arc resistance tester) - (computer control)

產产品称谓称：耐电弧试验机

Product name: electric arc resistance tester

车辆技术参数：NDH-A

Product model: NDH - A

满意标准单位：GB/T 1411-2002《粉状隔热原材料耐高偏低电流值弧光释放电能的经过多次实验发现》（共同IEC  61621-1997）及ASTM D495等标准化的要设计的概念制作业的，并具有IEC 149、UL 746A等经过多次实验发现技巧

Meet the standards: GB/T 1411-1411 "solid insulating material resistant to high voltage low current arc discharge test" (equivalent to IEC 61621-1997) and the requirements of standards such as ASTM D495 design and manufacturing, and conform to the IEC 149, UL 746 a test method, etc

一 概述

一An overview of the

最主要的符合依据及能力：

本疲劳压力试验机是依照规定应运于马达、电商和家里用的电商等行业领域的电焊工用相关物料、光敏光敏树脂胶和隔绝漆等隔绝相关物料的耐弧光效能划分，主在胶体隔绝相关物料如：相关物料、聚酰亚胺膜、光敏光敏树脂、矿石、工业陶瓷、玻璃钢、隔绝油、隔绝漆、瓦楞纸等材质的耐弧光效能各种测试；

本测试机由算机把控好作业，能否显现在当下测试情况及测试用时，测试结尾后并存为在当下测试参数，并可直接打印.条件调查汇报。

Main scope of application and features:

This machine is in accordance with the applied in motor, electrical appliances and household appliances and other industries with varnish insulation materials such as plastic, resin adhesive and the arc resistance evaluation, the main used for solid insulating material such as plastic, film, resin, mica, ceramic, glass, insulating oil, insulating paint, such as cardboard medium arc resistance test;

This testing machine controlled by computer operation, can display the current experimental condition and experimental time, after the experiment, and save the current experimental data and can be printed. Standard experiment report 

二 功能特点

1 超声波焊接机为下合二为一形式，上侧为方法机系统，上侧为实验室检测箱。

2 本新产品采用了*新智慧调整系统，可以通过选定 编译程序（IEC或ASTM）可自动式对其进行做实验的时候，并在电脑手机上上屏幕上显示测试过程中 和报告。

3 **性能参数优良，抗电磁波辐射专业能力强，测试测试准确高。

二：Functional features：

1 this machine is up and down a body structure, lower for the operating system, the upper part of test cases.

2 this product USES the latest intelligent control technology, through the selection process (IEC) or ASTM test can be automatically, and displayed on the computer and the test process and results.

3 good safety performance, strong anti-interference ability, high test precision. 

三 主要技术参数

1 电弧焊接通断时段出现偏差的原因：乘以 ±10ms

2 调压器出水量：2kVA

3 额定功率经过多次实验发现电阻值：12.5kV

4 试验报告相电压可靠性强，精密度：±3%

5 工作电流管理高精准度：±10%  电流值在测量精确：1.5%

6 金属电极对坯料压强：（0.5±0.05）N

7 电级建材：钨棒

8 工业范围：（6.35±0.1）mm（IEC）

               （6.0±0.1）mm（ASTM）

9 的使用的环境热度：（23±2）℃

10 应用大环境温度湿度：（50±5）%

11 供电：220V±5%  50Hz  10A

12 试验台    手段：   国家行业标准/美标/10 mA 接连/20 mA 间断性/30 mA不断/40 mA不断

13 耐压试验软件如下所述：

Three main technical parameters：

Error: 1 arc on-off time less than plus or minus 10 ms

Transformer capacity: 2 kva

3 test voltage rating: 12.5 kV

4: test voltage accuracy + / - 3%

5 current control accuracy: plus or minus 10% current measuring accuracy: 1.5%

6 electrode pressure on sample: (0.5 + 0.5) N

7 electrode materials: tungsten rods

8 electrode distance: 6.35 + / - 0.1 mm (6.0 + 0.1) mm (IEC) (ASTM)

9 using the environment temperature (23 + 2) ℃

10 use environment humidity: (50 + 5) %

Power supply: 220 v + 5% for 50 hz 10 a

Test method: beautiful mark / 10 gb / 30 mA mA continuous / 20 mA continuous/continuous / 40 mA continuous

13 test procedure is as follows:

Procedures section of the arc current

MA arc on-off time s the program s test total duration time s

IEC 61621 ASTM D495

1 1/8 10 s on 7/8 s broken 1/4 7/4 break 60 s 60 s

2 10 1/4 "s pass 3/4 s 1/4 3/4 break 60 s 120 s

3 to 10 1/4 "s make a quarter s break a quarter of a quarter break 60 s 180 s

4 consecutive 10 to 60, 240

5 20 consecutive 60, 300

30 consecutive 6 to 60, 360

7 consecutive 40 to 60, 420 

四  配置

Four configuration：

Serial number name number note

01 arc resistance tester

02 a electrode system

03 electrode bearing a set

04 a set of power cable

05 ground put a rod

06 milliammeter current one

7 a set of computer measurement and control software

08 specimen holder a

09 electrode distance standard 2 blocks

Standard 2 blocks of 10 Angle

11 ceramic pieces 2 pieces

12 one brand inkjet printer

13 1 computer brand

14 1 instruction manual

15 1 certificate

五 食品主要参数：

NDH-A    耐弧光试验检测仪-微机把控好

NDH-B    耐电弧放电耐压仪-接触屏操作

Five product model:

NDH - A arc resistance tester - microcomputer control

NDH - B arc resistance tester - touch screen control
ASTMD495耐高压低电流电弧放电试验机详情可以随时来电咨询！